Picture of JK4.0 Klamp 3/4" to 2" Pipe Clamp
Picture of JK4.0 Klamp 3/4" to 2" Pipe Clamp Picture of JK4.0 Klamp 3/4" to 2" Pipe Clamp

JK4.0 Klamp 3/4" to 2" Pipe Clamp

Non Stock Item
Manufacturer: J&K
Availability: Please select required attribute(s)
SKU: MSAS95-4
*
$357.95
Generate Spec Sheet
The new JK4.0 Klamp is designed for increased load holding
capacity on plastic pipe. The Size Specific jaw serrations machined to the exact pipe OD dimension which increases holding capacity and reduces pipe distortion. The tool comes with one set of jaws and additional sets can be added or ordered separately. Each set of Jaws are made from high-grade carbon steel and heat-treated for strength, dependability and long life. JK4.0 has an increased platform compared to other clamps, for increased for stability and a better fit on large diameter outer casing.
fit on larger diameter casing.
 

Features:

  •  Increased Load Capacity
  • Interchangeable Jaws to fit Specific Pipe Needs
  • High-grade heat-treated steel jaws
  • Larger Platform base
  • Safety Pin  to prevent accidental UnclampingEasy one-hand operation
  • Size adjustment and tension bolt
  • Internal Tensioner protected from dirt and water

Specifications:

Jaw Sizes: 3/4”, 1”, 1 1/4”, 1 1/2” or 2”
Workable material: PVC, Galvanized Steel, HDPE, & Rolled PE Pipe (Not intended for solid steel)
PVC Load Rating: 3500lbs
Galvanized Load Rating: 7000lbs

 

Description
The new JK4.0 Klamp is designed for increased load holding
capacity on plastic pipe. The Size Specific jaw serrations machined to the exact pipe OD dimension which increases holding capacity and reduces pipe distortion. The tool comes with one set of jaws and additional sets can be added or ordered separately. Each set of Jaws are made from high-grade carbon steel and heat-treated for strength, dependability and long life. JK4.0 has an increased platform compared to other clamps, for increased for stability and a better fit on large diameter outer casing.
fit on larger diameter casing.
 

Features:

  •  Increased Load Capacity
  • Interchangeable Jaws to fit Specific Pipe Needs
  • High-grade heat-treated steel jaws
  • Larger Platform base
  • Safety Pin  to prevent accidental UnclampingEasy one-hand operation
  • Size adjustment and tension bolt
  • Internal Tensioner protected from dirt and water

Specifications:

Jaw Sizes: 3/4”, 1”, 1 1/4”, 1 1/2” or 2”
Workable material: PVC, Galvanized Steel, HDPE, & Rolled PE Pipe (Not intended for solid steel)
PVC Load Rating: 3500lbs
Galvanized Load Rating: 7000lbs

 

Only registered users can write reviews